Specifications

P a g e | 76
Once the user makes an adjustment and the sensors have stabilized the user can tap the “Lock Adjusted” button. The
button will then change to “Unlock Adjusted”. If the “Unlock Adjusted” button is pushed it will unlock the adjusted
values allowing them to fluctuate. The user may now lock the value again. Failure to lock the values will result in the
adjusted values not being stored in the output file.
The user may also access the pressure sensor calibrate screen from this screen. Make sure that the hoses are
disconnected and sheltered from the wind when calibrating the pressure sensors. For calibration instructions refer to
section 6.5.3.