Specifications

P a g e | 61
5) Once the barcode has been verified the status will change to “Site/ID selected by Barcode”
6) The Trimble handheld computer will automatically populate the “Site” and “ID” text box with the correct
monitoring point.
7) If the barcode does not find a monitoring point then the status will change to “Failed to find Barcode/GPS
match”. If the ID is known, the user can manually select the Site and ID then tap the “Well ID Maintenance”
button to mark the barcode for that location. Instructions on how to Use the “Well ID Maintenance” function
can be found in section 6.10.1.
6.6.2 Analyze
This feature allows the user to measure the gas qualities and pressures for a selected sample point. The “Analyze”
screen is accessed by pressing the “Analyze” button on the “Select ID” screen.