Specifications

P a g e | 28
10) Once connected, tap the “Main Menu” button on the lower right hand corner of the screen.
6.3.3 Serial Connection (if desired)
If the user has problems with the Bluetooth link or desires to make a direct wired connection to the Envision® gas
analyzer, the user may use a standard RS232 Serial cable connection. This connection requires the RS232 boot on
the bottom of the Trimble handheld computer.
1) Tap “Login” on the “Login Menu”
2) Connect the Trimble handheld computer to the Envision® gas analyzer with the RS232 serial cable
3) Select “Serial Connection” in the analyzer display area.
4) Tap the button connect and the word “Connected to ….”” will be displayed above the “Meters” screen.
5) Once connected tap the “Main Menu” button on the lower right hand corner of the screen.