Specifications

P a g e | 159
12 Problems and Potential Solutions
12.1 Problems and Potential Solutions for Envision & Trimble
Problem
Potential Solution
Nomad will not Connect to the Envision
by Bluetooth
-Check the home screen on the Nomad to insure the WLAN is
OFF
-Check the Envision to make sure the blue light is flashing
next to the Bluetooth button
-Check the home screen on the Nomad to insure the
Bluetooth is ON
The Elkins Gas Analyzer software will not
turn on
The synchronizing setting for the Nomad has the Files box is
selected for Nomad to the Computer. Unselect the files box
and remove all your Field Data files from the Nomad.
Nomad will not read GPS
-Make sure that Sat Viewer is turned off.
-Check the settings on the Nomad to make sure they match
the settings in section 5.5 of this document for GPS
The lighting on the Nomad is dull
Press the green power button for just a second
O
2
reading seems high
-Check your filters and make sure that they are tight
-Change your O’Rings
-Make sure your hoses have no holes
The screen is dark
Please adjust your backlight setting to match section 5.3 of
this document. Also you can just hit the power button for a
second.
CH
4
is over 1000%
It is reading CH
4
LEL so click the CH
4
sign and it will change
If you are experiences an issue that is not listed above, or the solution above did not solve the issue, please
contact Elkins Earthworks® for further troubleshooting.