Specifications

P a g e | 155
10 Envision
®
Maintenance
10.1 Factory Maintenance
The Envision® gas analyzer should be returned to the factory at a minimum once per year for inspection and
factory calibration.
10.2 Field Maintenance
The Envision® gas monitor has two internal filters. Over time these filters may clog or become fowled and
may need to be changed. In order to change the filters, locate the aluminum door on the back of the
Envision® gas analyzer under the protective black boot.
Remove the aluminum filter door by loosening the screws and lifting the door off of the enclosure. Warning:
do not remove the filter door in dusty or wet atmospheres as the internal components can get damaged.