Specifications

P a g e | 103
The “Meter Status” screen gives the user useful information about the status of the Envision® meter.
 Battery time remaining – Indicates approximately how much time the Envision® has until the battery
needs charged.
 Meter Temperature – This displays the internal temperature of the Envision® gas analyzer.
 O
2
cell replacement – The date indicated is the date the O
2
cell was installed.
 Factory calibration – The date indicated is the last date the Envision® gas analyzer was last calibrated at
the factory.
 Firmware version – Indicates the firmware version installed in the Envision® gas analyzer.
 Heater - Indicates when the heater inside the Envision® would turn on if the external heater battery
pack is connected.
 Meter Error Conditions – Will display the last 10 meter error conditions. This is useful when talking to
tech support staff at Elkins Earthworks®.