TABLE OF CONTENTS 1 CARING FOR YOUR LCD MONITOR 2 WALL MOUNTING 2 UNPACKING 3 CONNECTING 3 4 BASIC SETUP 4 IMAGE SETTINGS USING THE OSD MENU 5 OSD MENU FUNCTIONS 6 TROUBLESHOOTING Deutsch STARTUP English TABLE OF CONTENTS 9 TECHNICAL SPECIFICATIONS 10 The monitor may be damaged if placed too near a source of heat. Be aware of the location of radiators, cookers, open fires etc. Do not allow sharp objects such as knives, pens, or pencils near the screen.
CARING FOR YOUR LCD MONITOR First, unplug the power cord from the wall socket If the LCD screen is extremely dirty, clean it with a moist cloth. Use only warm water and then wipe the monitor dry. Solvents or harsh cleaners can damage the housing. Clean the display surface only with a soft cloth, otherwise you may damage the display’s coating If the monitor is only slightly dirty, clean it using a soft, dry and antistatic cloth. The LCD monitor’s screen surface is very sensitive.
UNPACKING included (see fig. 1). Save the original box and packing material in case you have to ship English Carefully lift the monitor out of the packaging and make sure that all components are or transport the monitor. To set up the device, you must fit the monitor base together. Deutsch 1 pc 1 pc 1 pc Signal Cable Power Cable User’s Manual Figure 1.LCD Monitor Français Monitor Figure 1 CONNECTING 2.
STARTUP 1. First start your PC and then turn on your monitor using the power switch (⑤ in fig. 4). The status indicator (⑥ in fig. 4) should light up blue. 2. Adjust the image to meet your requirements (see the following sections “Basic Setup” and “Image settings using the OSD menu”). 3. If there is no image displayed on the monitor, consult the section “Troubleshooting”. BASIC SETUP Automatic Image Adjustment You can adjust the image settings (such as brightness, contrast, image position, phase, etc.
IMAGE SETTINGS USING THE OSD MENU English The OSD menu is a window on your screen that allows you to view and change display settings. To change an OSD setting: Deutsch Français Figure 4.Monitor features 2. Press the OSD button SEL/MENU (① in fig. 4) to activate the selected function or associated submenu. 3. If you selected submenu, now select the sub-function you want using the S or TOSD buttons(②and ③ in fig. 4). 4. Set the desired value using the OSD button S or T . 5.
OSD MENU FUNCTIONS Brightness/Contrast Controls the picture’s contrast, brightness, black level and auto level. Image Control Auto Adjustment: Automatically selects the optimal settings for image parameters (image position, phase, etc.) by using the button SEL/MENU (① in fig. 4). H. Position: Controls the picture’s horizontal position. V. Position: Controls the picture’s vertical position. Clock: Sets up the internal clock.
Color English Deutsch Regulates the color temperature settings. Activate the OSD window using the SEL/MENU button. Go to the COLOR option by pressing the S or T buttons. Press the SEL/MENU button and S or T to select R, G or B. Then you can change the color values using the S or T buttons Français OSD Setup Language: English, French , Spanish V. OSD Position: Controls the OSD menu’s vertical position.
Advanced Input Select: Controls the selection of the input signal. The monitor allows you to make the following connections: analog graphics card via the 15-pin mini D-Sub interface. Resolution Notifier: There is an optional OSD window (On/Off) that displays the newly adjusted screen resolution settings including both horizontal and vertical frequencies. Factory recall: SELECT: Start EXIT: Back Information The optimum resolution for this monitor is 1440 × 900 @ 60KHz .
TROUBLESHOOTING English Blank Screen Power indicator is off Power indicator lights orange A screen saver may have activated automatically after a certain period of inactivity. Press any key on your keyboard or move the mouse. Deutsch Make sure the power cable and the power adapter are connected properly (see section “Connecting”). Make sure that the monitor was turned on using the power switch (see section “Startup”).
TECHNICAL SPECIFICATIONS LCD panel 19 wide diagonal size Contrast ratio 500:1 (typical) View ing angle horizontal 140°, vertical 130° (typical) Response time 8ms (typical) Brightness 300 cd/㎡ (typical) Input signal Video: analog (D-SUB) Display colors 16.2 mill.
