Installation & Operation Manual

Introduction
The EMS provides three (3) wireless zones in one device to use with your SOLO wireless security system. The EMS has one integral
door/window magnet contact sensor, and support for up to two additional external sensors.
The EMS sensor has terminal connections that allow for up to two additional external sensors to be connected, such as a water/flood
sensor, a hardwired door/window contact or an external temperature sensor.
The EMS also includes two tamper switches for your added security.
Product Specification
*** For indoor use only***
Specifications :
Package Contents:
Operating Frequency: 433.92Mhz
Operating Temp.: -20°C~ 60°C (-4°F ~140°F)
Battery: 1 Panasonic CR123A Lithium
Battery Life: 3 years (under normal usage)
Dimensions (WxHxD): 42x75 x15.27mm
Build-in Detector: Tamper Switch, Back Switch, Reed Switch
1pc EMS sensor
1pc Bracket for Contact Magnet
1pc Magnet
2pcs Adhesive tape for Magnet / sensor
1pc Spacer
4pcs Screws for bracket/ sensor
1pc Installation & Operation manual
1. Terminal connector.
2. Jumper.
3. Device ID label.
4. Tamper switch.
5. Battery compartment.