User guide
You are about to install a product that is designed to outlast the life-cycle of the building. Once installed
the unit will operate continuously for 7 years and beyond without a major service. Please therefore ensure
that this product is treated with care and installed properly i.e. for the life of the building. If the unit is
mishandled you might break it! This invalidates the warranty.
And remember, if you have any problems please call our dedicated Technical Team. We are always
pleased to help and in an emergency will come out to site quickly, completely free of charge.
Wiring the fan correctly...
2
3
1
The connection into the fan MUST be a exible
cable and NOT solid core twin and earth, if the fan
is mishandled or a solid core twin and earth cable
is forced into the terminals you WILL break it, this
will invalidate the warranty.
If it is necessary to use twin and earth you must
not take it into the fan. Use a terminal block to
make the connection between the exible cable
supplied with the fan and your solid core twin
and earth cable. 12V D.C - Red wire on fan must
connect to red wire on SELV unit.
Place the cables inside the void in the back of the
back carcass next to the cable gland and secure
the fan to the wall securely.
Due to our policy of continuous innovation and improvement EnviroVent reserves the right to alter products
specication and appearance without notice.
IMPORTANT: The black grommets and sticky pad
provided must be tted in this unit. Not using these
items will jeopardise both the IP rating and the
warranty.