Since 1987 PRODUCT AND INSTALLATION MANUAL ESSENTIAL Drinking Water Filtration Systems Model Numbers: DWS, DWS-UV ALL FILTRATION PRODUCT PROUDLY MADE & ASSEMBLED IN THE USA EWS, Inc./Environmental Water Systems Office. 702.256.8182 Monday - Friday, 8:30 am - 4:30 pm Pacific Standard Time Fax. 702.256.3744 www.ewswater.com E-mail. customerservice@ewswater.
ESSENTIAL Drinking Water It’s not just about taste. Introducing the first and only drinking water system offering true protection from toxic contaminants. • World-class EWS quality and performance. • Highest quality carbon filtration available. • Hassle-free and low maintenance. • Quick and easy installation. • Made in the USA, meets or exceeds all compliances.
TECHNICAL INFORMATION 3 ESSENTIAL DRINKING WATER FILTRATION SYSTEMS MODEL #s: DWS and DWS-UV SYSTEM SPECIFICATIONS OPERATION TEMPERATURE: Maximum 100o F (38o C) / Minimum 40o F (4o C) OPERATION PRESSURE: Maximum 75 psi / Minimum 30 psi SYSTEM FLOW RATE: <1.0 gallons per minute (gpm) Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Replace your filters and UV lamp annually or as needed (do not exceed 1 year).
A Special Message to Our Customers EWS, Inc. and Environmental Water Systems would like to thank you for your consideration in selecting from our comprehensive list of residential filtration and conditioning product. We recommend that you take the time to read the information that pertains to your product as you begin to use it. The information in this manual is designed to assist your installer to set-up, install and start-up your system properly.
Placement or Locating the Dispenser/Faucet Professional Installation is Strongly Recommended Preferred - Select a standard sink location to mount the faucet. It is recommended that the faucet be placed in a hole provided on most sinks similar to the ones used for a sprayer, soap dispenser and/or dishwasher air gap. If the hole or space is unavailable, an alternative location will be required: MINIMUM HOLE REQUIRED 1/2”, MAXIMUM 1 3/8” Option A: On the sink.
Installation of the Supplied Dispenser/Faucet Step by step instructions to mount and secure the supplied dispenser/faucet If using another faucet, please review the instructions included with that product** Step 1: Locate Faucet Parts Bag Parts Included: faucet body with handle, faucet spout with tip, decorative washer, black rubber washer, white beveled washer, lock washer, hex nut, 1/4” tube insert sleeve, 1/4” plastic compression ferrule, 1/4” compression nut Optional Part: flat white washer (for use
Placement/Where to Install the Water System Simply place the water system on a level floor, cabinet bottom or horizontal surface. Always assume for enough space and tubing to remove, move and/or adjust the system for filter replacement and maintenance. If mounting the system to a wall, cabinet side or other vertical surface, a minimum clearance of 4” will be required to allow for filter replacement. Please see the following procedures: Step 1 All filter cartridges for the system are included.
Supplied Professional Connection Professional Installation is Strongly Recommended The supplied fitting is a John Guest Angle Stop Valve which connects between the supply valve and riser to the main water supply line*.
Connection of Tubing from Supply and to Dispenser/Faucet Step 1 This system may have come with sample plugs. If so, please remove correctly by following instructions below before installation. WARNING: NEVER ATTEMPT TO REMOVE TUBING OR SAMPLE PLUGS BY JUST PULLING. Follow simple instructions illustrated below to remove properly. INSPECT: Inspect the fitting for any damage from shipping, handling and/or delivery.
System Start-Up and Operation Procedures A proper start-up insures the system is without issues. If anything is discovered, this is the time to discover it and correct any problems or questions that arise. Lack of any, or a proper, start-up will void the warranty. Step 1 For Essential DWS with UV Upgrade Only Connect UV lamp cord and plug in transformer unit to typical 110v electric outlet. (DWS-UV only) NOTE: Electrical outlet must be dedicated and unswitched.
Register this Product - It is a Requirement for Warranty Familiarize yourself with the system, its’ replacement filters and maintenance. To Register, take note of the Model # found on the unit’s bracket Understand your system’s capabilities See water treatment options for protecting you, your family, and your home by EWS, Inc.
Filter and UV Lamp Replacements Correct set of filters for Model No. DWS Order Complete Set Model No. F.SET.DWS F-PRESED Stage 1 - 5 micron Pre-Sediment Filter Cartridge F-GAC Stage 2 - Pre-Filter Advanced Carbon Cartridge F-GAC-B Stage 3 - Post-Filter Carbon Block Cartridge Correct set of filters for Model No. DWS-UV Order Complete Set Model No. F.SET.
Trouble Shooting Guide - Drinking Water Filtration Systems Problem Possible Causes Solution Any or All Leaks Excessive pressure or pressure surges Pressure reducing valve (PRV) at main water supply to maintain pressure at or below 75 PSI or the addition of a Pressure Limiting Valve (item# FMP-60) on the inlet tube prior to the point of use unit Leaks at Tubing Connections Various causes to inspect •Follow instructions for Connection of Tubing.
Warranty Notification Notification: This warranty is referenced by EWS, Inc. in all literature, addressed in General Terms and Standard Conditions of Sale, and is published in its entirety in all EWS, Inc. product manuals, websites, and in all service guides supplied with all product. Limited Warranty: EWS, Inc.
T H E L E A D E R I N W H O L E H O M E W AT E R 15 F I L T R AT I O N The Spectrum Is The Right Product For You, Your Family & Your Home. SPECTRUM – The Professional Series Our most versatile systems, showcased by the National Association of Home Builders (NAHB) and New American Showcase Home. World-class EWS performance in a contractor-friendly install package.
The EWS, Inc./Environmental Water System Product available through: Authorized Kitchen & Bath Showrooms, Appliance Showrooms, Building & Plumbing Wholesale Supply Locations and their building, plumbing, HVAC and service contractors, and Authorized Online Distributors. Contact Information: EWS, INC. Environmental Water Systems ewswater.com O: E: F: 702.256.8182 (M-F 8:30am-4:30pm PST) customerservice@ewswater.com 702.256.3744 Mailing Address: 9101 W. Sahara Ave., #105-J8, Las Vegas, NV.
