Manual

!"#$%&"'(")*+,!-.%(//0,1"23,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,4'*%),5&))+(,6*27,8.(%*)$&",*"9,1"/)%:2)$&",;*":*+,!
!
,,,,,<==3>?>3@>ABC<?>3<<A3D@D=,E,FFF3("#(-.32&'!
!
!
6!
• Repeat this process in the Manual Screen for all 3 stations to ensure all chemicals have been
evacuated from the tubing lines.
• Carefully remove the tubes within the bottle caps from the sources bottles. Caution: the tubes may
contain some residual chemical.
• Remove the top 3 fittings from the back of the manifold using the Fastener Tool supplied with the
unit.
• Remove the bottom 3 tubes by twisting the blue portion of the luer fitting clockwise.
• The bottle harness should be stored in a dry environment which has low risk of contact with sources of
contamination.
• Begin with the first bullet under 2.2.1.
2.3. Setting Up Your Software
2.3.1. Before configuring the software make sure the Smart Bottle Rack is properly connected to the
SPE-Express. From the main screen in the software, run the “Configuration” option. Follow all
prompts.