SPE-Express Smart Bottle Rack Operation & Instructional Manual Call 800.745.8218 or 843.576.1147 • www.environmentalexpress.com Copyright, Environmental Express, Inc.
Environmental Express, Inc. Smart Bottle Rack Operation and Instruction Manual Contents 1 Specifications 2 1.0 General Information 3 1.1. Markings 3 1.2. Safety 3 1.3. Installation Requirements 3 1.3.1. Hardware 3 1.3.2. Software 3 1.4. Electrical Requirements 3 1.5. What’s Included 4 1.6.
Environmental Express, Inc. Smart Bottle Rack Operation and Instruction Manual Smart Bottle Rack Specifications (Inches) 800.343.5319/843.881.6560 • www.envexp.
Environmental Express, Inc. Smart Bottle Rack Operation and Instruction Manual 1.0 General Information. Please read this section thoroughly prior to installation. 1.1. Markings V = voltage AC = alternating current Hz = frequency A = amperes 1.2.
Environmental Express, Inc. Smart Bottle Rack Operation and Instruction Manual 1.5. What’s Included Box #1 • • • Smart Bottle Rack 25 Pin Connection Cable Reagent Umbilical Cord Box #2 – Water Miscible Waste Carboy 1.6.
Environmental Express, Inc. Smart Bottle Rack Operation and Instruction Manual • • • • All connections should be hand tight only. Over tightening these connections could cause them to weaken or crack and compromise the integrity of the seal.
Environmental Express, Inc. Smart Bottle Rack Operation and Instruction Manual • • • • • • Repeat this process in the Manual Screen for all 3 stations to ensure all chemicals have been evacuated from the tubing lines. Carefully remove the tubes within the bottle caps from the sources bottles.
Environmental Express, Inc. Smart Bottle Rack Operation and Instruction Manual 2.4. Sensors 2.4.1. The sensors are capacitance-based sensors and detect changes in state. For this reason it is important to keep the sensors free from loose objects coming in contact with them.
Environmental Express, Inc. Smart Bottle Rack Operation and Instruction Manual 3.0 System Operation 3.1. The Smart Bottle Rack is in continuous communication with the SPE-Express software. Before beginning a test the instrument checks the sensor levels.
Environmental Express, Inc. Smart Bottle Rack Operation and Instruction Manual 3.2. To change bottles or add solvent to an empty bottle first disconnect the gas pressure line from the side of the Smart Bottle Rack. Allow sufficient time for the bottle to reach an equilibrium state with the outside pressure.
