Owner manual
800.745.8218 / 843.576.1147 / www.environmentalexpress.com Environmental Express • 1
Heavy Duty LE Rotator: Operation and Instruction Manual General Information
Congratulations on the purchase of your Heavy Duty
LE Rotator from Environmental Express.
The well-designed Heavy Duty LE Rotator delivers quiet, consistent and dependable
service. Large 6.25" x 6.25" x 12.75" stainless steel compartments accommodate most zero
headspace extractors and many styles of glass and plastic bottles. The box style design offers
a greater degree of safety than other styles of rotators.
The 12-position sample box is constructed of 14 gauge stainless steel reinforced at all
joints. The drive shaft is a full 1” in diameter to prevent any breakage, even with off-center
loads. Glass bottles containing extraction uid are shielded within the stainless steel box, not
rotating exposed in your laboratory.
LE1002 rotators use Brother® high efciency gear motors with self-lubricating
drive chains. Brother gear motors are designed in accordance with today’s most stringent
industrial standards to ensure longer service life and increased reliability. These all-helical
gears are among the quietest available and have the very high surface hardness required
to insure extended wear resistance commonly associated with EPA Method 1311. A self-
lubricating chain prevents slippage and requires no maintenance. Precise, constant speed
control is maintained during long hours of continuous operation.
Rotator Specications:
Dimensions: 24.5"W x 21.5"D x 45.0"L; 12-place
Weight: 172 lb.
Construction: 14 guage stainless steel
Compartments: 12, 6.25" x 6.25" x 12.75"
Shipping Weight: 262lb. Delivery by truck only.
Electrical: Gearmotor LE1002 — Brother 1/6 HP/120VAC/60Hz/1.7AMP (FL)
Gearmotor LE1003 — Brother 1/6 HP/240VAC/50Hz/.8 AMP (FL)
Switch/Circuit Breaker — 15AMP Integral Unit
Capacitor LE 1002 — 120 VAC/24µF (+10 to - 5%)
Capacitor LE1003 — 240 VAC/6µF (+10 to - 5%)
Bearings: NTN® Sealed Ball, Maintenance Free, Heavy Duty Flanged
Drive Components: Synchronous Self Lubricating Chain
Synchronous Timing Sprockets
Rotating Box and Guard: Custom Fabricated from Type 304 Stainless Steel
Frame: Custom Fabricated from Mild Steel Components
Paint and Prime Coat
Chemical Resistant Two-Part Industrial Enamel
Description Catalog #
Twelve-place rotator LE1002
Twelve-place rotator, 240VAC LE1003