Owner's manual
800.745.8218 / 843.576.1147 / www.environmentalexpress.com Environmental Express • 29
HotBlock™: Operation and Instruction Manual Adaptation of EPA Method 3060
3.7 Filter each sample using a 0.45µm FlipMate (SC0601).
3.8 Adjust the pH of the digestate accordingly to the method being used for
analysis. If a precipitate forms, the sample should be ltered as in 3.7.
3.9 Adjust the sample volume to 100mL with reagent water. Mix well. The
sample digestates are new ready to be analyzed.
All QC samples, concentration limitations, interferences, and reagent specications
are addressed in depth in EPA method 3060A. Safety concerns are also part of
the full method. Follow the instructions listed in EPA method 3060A. These
steps should only be used as a guide to help improve the performance of your
HotBlock™ and StirBase.