Owner manual

Environmental Express, Inc.
!
www.envexp.com 11
!
3.0 SERVICE SCREEN
From the Main Screen, click on the Service Screen button for access to any service related items.
3.1 Reagents Tab
3.1.1 To assign a reagent to a specific port, click the drop-down arrow on the port number and
select the appropriate reagent. The reagent is now assigned to that port.
NOTE: Ports #1 and #6 will always be assigned to DI Water and cannot be changed.
3.1.2 To add a new reagent, click on the “ADD REAGENT” button.
3.1.2.1 Enter the reagent name (20 character maximum).
3.1.2.2 Assign a viscosity to the reagent.
3.1.2.3 Type in any notes in the details field and click OK (25 character maximum).
3.1.3 To delete a reagent, highlight the reagent you wish to delete and click on the “DELETE
REAGENT” button. A pop-up will appear prompting the user to either confirm the deletion or
cancel.
NOTE: The user cannot delete H
2
O as a reagent as this must always be used in the AutoBlock
methods and is always assigned to ports 1 and 6.