Instructions / Assembly

WIRING TO A PLUG
1. The fixture can be connected to either a 120 V, or a 277 V outlet,
using a plug adapter (not included). Determine which voltage works
best for you, and purchase the required parts (see above).
2. Wire the fixture power wires (Black, White and Green) to the
purchased plug, following the instructions provided with the plug
assembly.
3. Ensure that all wire connections are secure and tucked away, then
insert the cord with plug into a nearby outlet to power the fixture.
WIRING DIRECTLY TO JUNCTION BOX
1. Before beginning, ensure the power to the junction box is off.
2. To wire the fixture directly to a junction box, you will need to
purchase a 1/8 in. fitting (A). Additionally, ensure that the
junction box is mounted externally (see above), so that the cord
w/fitting (A) can be attached to the knockout on the side of the
junction box.
3. Choose a knockout on the side of the junction box. Remove the
knockout.
4. Attach the fitting (A) to the cord.
5. Wire the fixture power wires to the supply power wires using
wire nuts (C), ensuring that all connections are secure. Tuck
the connections into the junction box.
6. Attach the cord with fitting to the junction box.
7. If you are using the recommended Canopy Kit (B), or any other
approved mounting method, mount the fixture to the junction
box now, following the instructions included in the kit.
8. Restore power to the fixture.
1/8 in. Non-
Metallic Twin-
Screw Cable
Clamp
Connectors
120 V Plug
Model#:
AS515P
277 V Plug
Model#:
ASL720P
WIRING
TO
OUTLET
WIRING
DIRECT TO
JUNCTION
BOX
NOTE: This manual shows the mounting options for this fixture, and
provides wiring instructions. It is recommended to completely wire
the fixture before mounting.
A
B
C
0-10V DIMMING
FIXTURE
OUTPUT WIRE
0-10V
DIMMER
WHITE
PURPLE
GREY
GREEN/BARE
BLACK
POWER IN
BLACK
WHITE
GREEN/BARE
NOTE: PARTS NOT INCLUDED