Instructions / Assembly

1. Optional: The fixture can be connected to a 277 V outlet, using a plug
adapter (not included). Determine which voltage works best for you, and
purchase the required parts (see above).
2. Wire the fixture power wires (black, white, and green) to the purchased
plug, following the instructions provided with the plug assembly.
3. Ensure that all wire connections are secure and tucked away, then insert
the cord with plug into a nearby outlet to power the fixture.
4. Class 2, 0-10 V power supply should be used to provide 0-10 V signal to
dimming leads of the luminaire.
NOTE: This manual shows the mounting options for this fixture, and provides
wiring instructions. It is recommended to completely wire the fixture before
mounting.
1. Before beginning, ensure the power to the junction box is off.
2. To wire the fixture directly to a junction box, you will need to purchase a 1/8
in. fitting (A). Additionally, ensure that the junction box is mounted externally
(see above), so that the cord with fitting (A) can be attached to the knockout
on the side of the junction box.
3. Choose a knockout on the side of the junction box. Remove the knockout.
4. Attach the fitting (A) to the cord.
5. Wire the fixture power wires to the supply power wires using wire nuts (C),
ensuring that all connections are secure. Tuck the connections into the
junction box.
6. Attach the cord with the fitting to the junction box.
7. If you are using the recommended canopy kit (B), or any other approved
mounting method, mount the fixture to the junction box now, following the
instructions included in the kit.
8. Restore power to the fixture.
NOTE: PARTS NOT INCLUDED
WIRING TO OUTLETWIRING DIRECTLY TO JUNCTION BOX
WIRING
DIRECT TO
JUNCTION
BOX
UL Listed
Strain Relief
Bushing
WIRING
TO
OUTLET
277 V
Plug
0-10V DIMMING
FIXTURE
OUTPUT WIRE
0-10V
DIMMER
WHITE
PURPLE
PINK
GREEN/BARE
BLACK
POWER IN
BLACK
WHITE
GREEN/BARE