Installation Guide

1
Placing the fixture
 Turn off the power at the circuit
breaker box.
 Remove the fixture (A) from the
packaging.
 Rest the fixture (A) on the T-Bar of the
ceiling suspension system in the
desired location.
2
Securing the fixture
 From above the ceiling, secure the fixture
(A) to the T-Bar by bending the built in T-
bar clips on all four corners of the fixture
(A).
 If local code requires, tie a wire to at least
two of the four T-bar clips located near
each corner of the fixture (A) to a structural
member of the ceiling.
Installation
A
A
T-bar Clips
4