Installation Guide
Safety Information
Before starting installation of this
fixture or removal of a previous
fixture, disconnect the power by
turning off the circuit breaker or by
removing the fuse at the fuse box.
Consult a qualified electrician if you have any electrical questions or need to replace
the driver.
If you have any non-electrical questions about this fixture, please contact our
Customer Service Team at 1-855-573-6156.
WARNING: Disconnect the power
prior to removing or installing a
light fixture.
Planning the Installation
NOTE: Keep your receipt and
these instructions for Proof of
Purchase.
Read all instructions before assembly and installation. Before starting installation of the
fixture or removal of a previous fixture, disconnect the power by turning off the circuit
breaker or by removing the fuse at the fuse box. To avoid damaging this product,
assemble it on a soft, non-abrasive surface such as carpet or cardboard.
Tools Required
2
Phillips
Screwdriver
Wire
Cutter
Wire
Stripper
Pliers
Ladder
Safety
Goggles
Electrical
Tape
3 Wire
Nuts