Installation Guide

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
1 LUMINAIRE
GENERAL:
1. All electrical connections must be in accordance with local, and
national electrical codes
national
electrical
codes
.
2. Prior to installation it is important to follow the following guidelines:
A. Turn off the main power at the circuit breaker before installing the
fixture, to prevent possible shock.
B
Be sure that all wires were not damaged during installation and
B
.
Be
sure
that
all
wires
were
not
damaged
during
installation
and
that there are no rough or sharp edges in contact with the wires.
WARNING:
•Min 75°C supply conductors, Type IC, INHERENTLY PROTECTED.
Thi d t t b i t ll d i d ith th li bl
•
Thi
s pro
d
uc
t
mus
t
b
e
i
ns
t
a
ll
e
d
i
n accor
d
ance w
ith
th
e app
li
ca
bl
e
installation code by a person familiar with the construction and
operation of the product and the hazards involved.
• Blinking light of this thermally protected luminaire may indicate
overheating
Page 3
overheating
.
• Vapor barrier must be suitable for 90°C.
• Suitable for damp locations.