Instructions / Assembly

PARTS INCLUDED FOR INSTALLATION (parts are not to scale):

3 ea Wire

Nuts (#14)

2 ea Bracket Mounting

Screws (#5)

1 ea Mounting

Bracket (#4)

1 ea Fixture (#1)

INSTALLATION INSTRUCTIONS:

1. Remove the Canopy Mounting Screws (#6) from the Mounting Bracket (#4). Keep the Canopy Mounting

Screws (#6). (Fig. 1)

2. Pull the power supply wires out from the Outlet Box (#3), and mount the Mounting Bracket (#4) to the

Outlet Box (#3), using the Bracket Mounting Screws (#5). (Fig. 1)

3. Attach the Black Supply Wire (#14) to the Black Fixture Wire (#10) and the White Supply Wire (#15) to

the White Fixture Wire (#11) using Wire Nuts (#13). Connect the Fixture Ground Wire (#12) and the

Supply Ground Wire (#16) together using a Wire Nut (#13). Wrap all wire connections with electrical

tape for a more secure connection. (Fig. 1) Note: If you have electrical questions, consult your local

electrical code for approved grounding methods.

4. Carefully tuck all Wires and Wire Nuts (#13) into the Outlet Box. Place the Canopy (#8) of the Fixture

over the Outlet Box (#3), flush against the ceiling surface, making sure the Canopy Mounting Holes align

with the Mounting Holes of the Swivel Bar (#9). Thread the Canopy Mounting Screws into the Canopy

Mounting Holes to secure the Canopy (#8) onto the Swivel Bar and flush against the ceiling. (Fig. 1)

5. Installation is complete. Turn on power at the circuit breaker or fuse box. Turn the light switch on to

activate the fixture.