Installation Guide
PARTSINCLUDEDFORINSTALLATION(partsarenottoscale):
2eaBracketMounting
Screws(#5)
1eaMounting
Bracket(#4)
3eaWire
Nuts(#14)
1 ea Fixture (#1)
INSTALLATIONINSTRUCTIONS:
1
ea
Fixture
(#1)
1. Remove the Canopy Mounting Screws (#6) from the Mounting Bracket (#4). Keep the Canopy Mounting Screws
(#6). (Fig. 2)
2. Rotate the Swivel Bar (#9) of the Mounting Bracket (#4) so that it is perpendicular to the Straight Bar (#7). (Fig. 3)
3. Pull the power supply wires out f rom the Outlet Box (#3), and mount the Mounting Bracket (#4) to the Outlet Box
(#3), using the Bracket Mounting Screws (#5). (Fig. 4)
4. Turn the Swivel Bar (#9) to the desired position, keeping in mind that it will determine the final orientation of the
Fixture itself. Tighten both Center Screws (#17). (Fig. 4 )
5. Attach the Black Supply Wire (#14) to the Black Fixture Wire (#10) and the White Supply Wire (#15) to the White
Fixture W ire (#11) using Wire Nuts (#13). Connect the Fixture Ground Wire (#12) and the Supply Ground Wire
(#16) together using a Wire Nut (#13). Wrap all wire connections with electrical tape for a more secure
connection
.
(Fig
.
5
)
Note
:
If
you
have
electrical
questions,
consult
your
local
electrical
code
for
approved
connection
.
(Fig
.
5
)
Note
:
If
you
have
electrical
questions,
consult
your
local
electrical
code
for
approved
grounding methods.
6. Carefully tuck all W ires and Wire Nuts (#13 ) into the Outlet Box. Place the Canopy (#8) of the Fixture over the
Outlet Box (#3), flush against the ceiling surface, making sure the Canopy Mounting Holes align with the
Mounting Holes of the Swivel Bar (#9). Thread the Canopy Mounting Screws into the Canopy Mounting Holes to
secure the Canopy (#8) onto the Swivel Bar and flush against the ceiling. (Fig. 6)
Page6
7. Proceed back to the Assembly Instructions.
8. Installation is complete. Turn on power at the circuit breaker or fuse box. Turn the light switch on to activate the
fixture.