Instructions / Assembly
ALL RIGHTS RESERVED Envirolite 2015
_____________________________
FIVE-YEAR LIMITED WARRANTY
Envirolite
warrants this product to be free from defects in material and workmanship for five years from the original date of purchase by
the consumer. This warranty is limited to the counter replacement at the time of purchase, with the original purchase receipt. Envirolite
will not be liable for the loss or damage of any kind, incidental or consequential damages of any kind, whether based on warranty contract or
negligence, and arising in connection with the sale, use or repair of the product claimed to be defective. Some states do not allow the
exclusion or limitation of incidental or consequential damages so the above limitation may not apply to you. This warranty gives you specific
legal rights and you may also have other rights, which vary from state to state. Misuse, accident, improper installation or maintenance will
also void the warranty.
_____________________________
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiver antenna.
• Increase the separation between the equipment and receiver.
• Install the product onto on a circuit different from that to which the receiver is connected.
• Consult with the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes made to the electronics circuit will void this equipment’s compliance with Part 15 of the FCC Rules and should not
be operated.
________
DIMMING
Dimming performance may depend on the
dimmer, the dimmer range adjustment setting (for
dimmers with brightness range adjustments), the
wiring method, and/or the number of LED
modules installed onto the dimmer circuit.
For a complete list of compatible dimmers, please
look up the item number listed on the cover of
this instruction manual at
http://www.homedepot.com/.
REV 08-DEC-15
C D L
• Tc
MODEL:
CDLPS150R10
Dimmable LED Driver
CAUTION:
Risk of Electric Shock
Dry Location Only
For Indoor Use Only
____
_ _ _
AC INPUT:
120 Vac/Max 200 mA
60Hz PF >0.9
L-BLACK
N-WHITE
Made in China
DC OUTPUT:
50-66V
Red:+ White:
Regulated current:
16 mA
ATTENTION:
RISQUE DE CHOC POUR
EMPLACEMENTS
SECS SEULEMENT
USAGE INTÉRIEUR
SEULEMENT
Brand
Series
Model #
Wiring
Version
Code
Max
Luminaires
Dimming
Range
Lutron
Ariadni/Toggler C.L
AYCL-153P
3-Way
T4, T8
15
10% - 100%
TGCL-153P
Diva C.L
DVCL-153P
Skylark C.L
SCL-153P
Skylark Contour C.L
CTCL-153P
Lumea C.L
LGCL-153P
Maestro C.L
MACL-153M
3-Way
2014
15
11% - 97%
MSCL-VP153M
single/multi
T2
15
11% - 97%
MSCL-OP153M
single/multi
MRF2-6CL
NA
M6
15
11% - 97%
Nova T
NTCL-250
single
BR Y02
15
11% - 97%
Grafik T
GT-150
single
T6
15
10% - 100%
Grafik T RF
GTJ-150
single
M6
15
10% - 99%
Caseta
PD-6WCL
NA
SD11
15
5% - 96%
Leviton
Decora
DSL06-1L
3-Way
NA
30
23% - 100%
Illuma Tech
IPL06-10
3-Way
NA
15
11% - 100%
Sureslide
6672-1L
single
NA
15
19% - 100%
Sureslide
6674-P0
3-Way
NA
15
11% - 100%
_____________________
DRIVER REPLACEMENT
1. DISCONNECT MAIN POWER AT FUSE OR CIRCUIT BREAKER.
2. Pull the RETROFIT TRIM down from the RECESSED HOUSING.
Unplug the FEMALE CONNECTOR of the RETROFIT TRIM from the
MALE CONNECTOR of the SOCKET ADAPTER ASSEMBLY. (FIG. 3)
3. Remove the REFLECTOR RING, REFLECTOR and LENS.
4. Remove the DRIVER SCREWS and separate the old LED DRIVER from
the CAST HEAT SINK. (FIG. 5)
5. Detach the LED DRIVER QUICK-CONNECTOR from the LED
TERMINAL BLOCK. (FIG. 6)
6. Mount the new LED DRIVER onto the CAST HEAT SINK using the
previously removed DRIVER SCREWS. (FIG. 5)
7. Insert the new LED DRIVER QUICK-CONNECTOR to the TERMINAL
BLOCK. (FIG. 6)
8. Replace the LENS, REFLECTOR, and REFLECTOR RING.
9. Re-install the RETROFIT TRIM into the RECESSED HOUSING. (FIG. 4)
POWER
IN
TRIAC
DIMMER
WHITE
BLACK
BARE/
GREEN
WHITE
BLACK
BARE/
GREEN
FIXTURE
OUTPUT WIRE