Manual

Remote Centre| Operation
(
Setting the time
When batteries are inserted, the time will
automaticafly be set to 12.00 AM.
1) With the back cover off, press the CLK
button with the tip of a ball pen, etc. The
time indicator win flash, the time can now
be set.
2) Press the HOUR button to change the
hour. Example: (Set to IO:AM ) see front
view.
3) Press the MIN button to change the min=
utes. Example: (Set to 30) see front view.
4) When time is set press the CLK button
again. Slide the cover back, be sure it's
clicked securely into place.
Nore: The timer is set on basis of the time on_
We clock. Be sure to set the clock correctly.)
Press /i
SLEEP
button
Sleep mode
Sleep mode will reduce operation sound when
sleeping.
1) Press the SLEEP button to activate this
feature (air flow sound from the indoor unit
is decreased).
2) Press the SLEEP button again to release
the sleep mode or press the FAN SPEED
button during the SLEEP mode, and the
SLEEP mode is released
Nore: Use the sleep mode when you are_
\ I going to bed. If thb mode is used during the I
Press I day, the capacity is reduced since the ambF I
FAN lent temperature is higher. (COOL mode is I
SPEED _ecommended for day use) J
button
<, i