Manual

Remote Centre| Operation
Up/down air flow direction adiustment
The up/down air flow direction can be adjusted by pressing the VANE CONTROL button
on the remote control, each time this button is pressed, the vane angle changes in the
following sequence: J i
(1) _ (2) !_ _ (3) T (4) (5)
, (1) through (5) are fixed positions.
, AUTO oscillates up and down automatically.
Air flow veleeit_iustment
To change the vane control velocity press the FAN SPEED button.
Each time the button is pressed, fan speed is changed in sequence,
[LO] 41 [MID] dr1 [HI]
To cool the whole room, use the dJ_ [HI] setting in COOL MODE. If the sound of the
air conditioner operating disturbs your sleep, use the SLEEP mode. (See next page)
Recommended horizontal VANE ran_qe
in _ AUTO mode the VANE positions are
adjusted automatically.
In ¢ COOL or _DRY mode VANE positions
(1) _ or (2) _ are recommended.
In _31sHEAT mode VANE positions (3)
(4) t or (5)A are recommended.
Lea/right air flow direction adiustment
Adjust the air flow direction by hand,
move the air flow direction fins left/right to
direct the air as desired.
Swing adiustment (auto oscillation)
Press the SWING button, to adjust the air
swinging direction. Press the button again
to exit the SWING mode.
H
/ NNote: _'_
• In the cooling operation, when the air con-
ditioner is operated with VANECONTROL
blowing down (4) or (5) for I hour, the
VANECONTROLdirectionis automatically
set to level to prevent condensed water
from dropping.
•Adjust the vertical VANE CONTROL direc-
tion using the remote control.
• Inheatingoperation,if theoutputair temper-
ature is too low or whendefrostingis done,
thehorizontal vaneposition isset to (1).
N.. __ j