Manual

Remote Centre| Operation
U_ & down air flow direction adiuetment
The up/down air flow direction can be adjusted by pressing the OUT FLAP button on
the remote control, each time this button is pressed, the vane angle changes in the
following sequence: j
(1) _ (2) _ (4) _ (5) ,
. (1) through (5) are fixed positions.
, AUTO oscillates up and down automatically.
Air flow veleeit_uetment
To change the vane control velocity press the FAN SPEED button.
Each time the button is pressed, fan speed is changed in sequence,
a [LO] da [MID] _l [HI] _[AUTO]
To cool the whole room, use the _ti [HI] setting in COOL MODE. if the sound of the
air conditioner operating disturbs your sleep, use the SLEEP mode.
Recommended horizontal VANE range
in _ AUTO mode the VANE positions are
adjusted automatically.
in ¢ COOL or (_}DRY mode VANE positions
(1) _ or (2) _ are recommended.
In _!,_.1-HEATmode VANE positions (3)
(4) _ or (5)i are recommended.
Horizontal & verdcal auto swin_CL
_uetment
Adjust the left to right air flow direction
with the remote control:
, Press the IN FLAP button, the air
swing fins will continually oscillate left
to right.
, Step through the diferent fins positions
using the iN FLAP button (fins can
also be set in a fixed position).
f
Note:
• in the cooling operation, when the air con-
ditioneris operatedwith OUTFLAPblowing
down (4) or (5) for 1 hour, the OUT FLAP
directionis automatically set to level to pre-
vent condensed waterfrom dropping.
Adjust the vertical OUT FLAP direction us-
ing the remote control.
In heatingoperation,if theoutputair temper-
ature is too fow or whendefrostingis done,
thehorizontal vaneposition isset to (1).
J