User manual

Secondary Installation
CAUTION: NEVER OPERATE THIS APPLIANCE WITH THE GLASS DOOR REMOVED.
4. Upon the rst light up, watch for
ignition to ALL burner ports. If a
long delay is noted: First, wait for the
appliance to cool down.
• Open the front door of the appliance.
• Check to carefully reposition the
embers making sure that burner ports
are not plugged solid or blocked.
Important note: When the unit is
turned on for the rst time, It should be
turned onto high without the fan on for
the rst 4 hours. This will cure the paint,
logs, gasket material and the other
products used in the manufacturing
process. It is advisable to open a
window or door, as the unit will start
to smoke and can irritate some people.
After the unit has gone through the rst
burn turn the unit off including the pilot,
let the unit get cold then remove the
glass door and clean it with a good gas
replace glass cleaner, available at your
local ENVIRO dealer.
See Routine Maintenance And Service
on how to remove door to clean glass.
Resting Areas for
Center Log
Figure 36: Log Placement with Embers.
Figure 37: Appliance Burning.
24
Figure 35: Step 5 of Log Placement.