Specifications

The equipment covered by this manual is designed for
safe and reliable operation when installed and operated
within its design specification limits. To avoid person-
al injury or damage to equipment or property while
installing or operating this equipment, it is essential
that qualified, experienced personnel perform these
functions using good judgment and safe practices. See
the following cautionary statements.
ELECTRICAL SHOCK HAZARDS.
All power must be disconnected prior to
installation and serving this equipment.
More than one source of power may be
present. Disconnect all power sources
to avoid electrocution or shock injuries.
MOVING PARTS HAZARDS. Motor
and Blower must be disconnected prior
to opening access panels. Motors can
start automatically, disconnect all power
and control circuits prior to servicing to
avoid serious crushing or dismember-
ment injuries.
HOT PARTS HAZARDS. Electric Resis-
tance heating elements must be discon-
nected prior to servicing. Electric Heaters
may start automatically, disconnect all
power and control circuits prior to servic-
ing to avoid burns.
SAFETY CONSIDERATIONS
WARNING
Failure to follow these instructions could result in death, serious
injury or equipment damage
Follow all warnings and instructions in the unit's Manual(s).
1. Follow all applicable regulations and safety practices during rigging and lifting.
2. Prepare and follow written rigging and lifting plan.
3. Lifting must be directed by trained professional rigger.
4. Spreader bars must be used and be long enough to prevent rigging from contacting
unit.
5. Use all and only designated lift points according to unit's Manual(s).
6. Locate center of gravity through trial lifts to account for possible variations in unit
configuration.
7. Use rigging
and lifting techniques that keep unit stable and level.
8. Keep clear of unit when lifted.
JOHNSON CONTROLS
3
SAFETY CONSIDERATIONS
FORM ET102.19-NOM1
ISSUE DATE:07/26/2013