Instruction manual

FS 55, FS 55 C, FS 55 R, FS 55 RC
English
41
Definitions
1 Mowing Head
The cutting attachment, i. e.
mowing head, for different
purposes.
2 Deflector for Mowing Heads
The deflector is designed to reduce
the risk of injury from foreign objects
flung backwards toward the
operator by the cutting attachment
and from contact with the cutting
attachment.
3 Line Limiting blade
Metal blade at the deflector in order
to keep the line of the mowing head
at the proper length.
4 Deflector with Skirt for all Mowing
Attachments
The deflector is designed to reduce
the risk of injury from foreign objects
flung backwards toward the
operator by the cutting attachment
and from contact with the cutting
attachment. Is not designed to
contain fragmented metal blades.
5Skirt
The skirt at the bottom of the
deflector must be utilized as
described in the chapter "Mounting
the Deflector".
6 Metal Mowing Tool
The cutting attachment, i. e. blade,
made from metal for different
purposes.
EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
CARB
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Engine
Single cylinder two-stroke engine
Ignition System
Electronic magneto ignition
Fuel System
All position diaphragm carburetor with
integral fuel pump
Specifications
A = 300 hours
B = 125 hours
C = 50 hours
Extended = 300 hours
Intermediate = 125 hours
Moderate = 50 hours
Displacement: 1.66 cu. in.
(27.2 cm
3
)
Bore: 1.34 in (34 mm)
Stroke: 1.18 in (30 mm)
Engine power to
ISO 8893: 1 hp (0.75 kW)
Idle speed: 2,800 rpm
Max. engine speed
(rated): 9,500 rpm
Max. output shaft
speed (cutting
attachment): 7,700 rpm
Spark plug (resistor
type):
Bosch WSR 6 F,
NGK BPMR 7 A
Electrode gap: 0.02 in (0.5 mm)
Fuel tank capacity: 11.2 fl.oz (0.33 L)