Instruction manual

FS 55, FS 55 C, FS 55 R, FS 55 RC
English
12
6 STIHL PolyCut 20-3
Metal mowing attachments
7 Grass cutting blade 230-2
8 Grass cutting blade 230-4
9 Grass cutting blade 230-8
Deflectors
10 Deflectoronly for mowing heads
11 Deflector with
12 Skirt and blade for all mowing heads
13 Deflector without skirt and blade for
all metal mowing attachments
Handles
14 Loop handle
15 Loop handlewith
16 Barrier bar
17 Bike handle
Harnesses
18 Shoulder strap may be used
19 Shoulder strap must be used
20 Full harness may be used
Mounting the handlebar
N Position the clamp (1) and
handlebar support (2) on the
shaft (3)
N Place the handlebar (4) in the
handlebar support – the rubber
handle (5) must be on the left
(viewing direction from engine to
handlebar)
N Place the clamp (6) on the
handlebar support
N Insert screws (7) through the holes
in the parts and screw them into the
clamp (6) as far as they will go
N Fasten handlebar (4) at a
distance (A) of approx. 15 cm (6 in)
ahead of the engine housing on the
shaft (3)
N Align the handlebar and tighten the
screws
Non-metal grass cutting blades
are not approved.
Mounting the Bike Handle
1
3
2
5
7
6
4
233BA025 KN
4
A
3
233BA018 KN