- Sherwood Industries Ltd. Indoor Fireplace User Manual

DECIDING WHERE TO LOCATE YOUR STOVE

DIMENSIONS:

FIG. 1

Front Width: 22"/ 56 cm

Rear Width: 22"/ 56 cm

Height: 27-1/2"/ 70 cm*

Depth 19"/ 48 cm

(*not including vent coupling)

Shipping Weight: 210 lbs/95 kg

CLEARANCES:

A. Side wall to stove 10"/ 25 cm

B. Rear wall to stove 4"/ 10 cm

C. Combustible to stove Top 22”/ 56 cm

D. Floor to stove 0"/ 0 cm

E. Corner clearance 2"/ 5 cm

F. Alcove depth 48"/ 122 cm

Maintain sufficient clearances

for service and maintenance

FIG. 2

• The stove should be located out of traffic and away from furniture and draperies.

• The stove should have sufficient access for its safe operation and maintenance.

• Locate a position where the flue system of the stove can be properly installed without damaging the integrity

of the building. e.g. cutting a wall or ceiling joist.

• The stove can be installed on any standard flooring materials i.e. Wood, carpet or linoleum.

• Check stove and flue system clearance requirements.

• Locate the stove where it can be accessed by a gas supply line.

• Locate the stove in a large and open room that is centrally located in the house. This will optimize heat

circulation and comfort.

• As the stove is equipped with a convection fan, ensure that an electrical outlet is within 6ft. (1.8m) of the

stove.

• These stoves can be installed in bedrooms.

(IN CANADA: must be installed with a listed wall thermostat)

(IN USA: see current ANSI Z223.1 for installation instructions.)

• The

flow of combustion and ventilation air must not be obstructed.