Product manual
5 6
OPERATING THE IONIC PRO
®
COMPACT
IONIC AIR PURIFIER
Getting Ready
Locate a level surface on which to place your Ionic Pro
®
Compact ionic air purier and a
grounded 120v outlet (follow warnings described in the “SAFETY INSTRUCTIONS”
section of this manual). Position your Ionic Pro
®
Compact ionic air purier at least one foot
(12 inches) from the wall.
Plug in the unit. You are now ready to turn on your Ionic Pro® Compact ionic
air purier!
Controls/Settings
1. ON/OFF BUTTON Turns unit on and o.
2. LO At this setting, the unit will cycle ON and
(low output indication light) OFF. It will cycle ON for approximately 25
seconds, and then rest for 25 seconds. is
cycling will continue as long as the unit is in
LO mode.
3. HI At this setting, the unit stays ON continuously.
(high output indication light)
4. CLEAN is red light goes on when your Ionic Pro®
(indication light) Compact ionic air purier needs to be cleaned,
or the unit is experiencing some other problem.
See the “CLEANING & MAINTENANCE”
and “TROUBLE-SHOOTING” sections.
5. WIRE CLEANING MECHANISM is is used to clean the internal ionizing wires.
See “CLEANING & MAINTENANCE” for
full details.
6. REMOVABLE CAP Lift o the Removable Cap to locate collection
blades for cleaning (as described in
“CLEANING & MAINTENANCE” section).
6. REMOVABLE CAP
5. WIRE CLEANING
MECHANISM
3. HIGH OUTPUT
INDICATION
LIGHT
2. LOW OUTPUT
INDICATION
LIGHTS
1. ON/OFF BUTTON
4. CLEAN INDICATION
LIGHT
OPERATING THE IONIC PRO® COMPACT IONIC AIR PURIFIER OPERATING THE IONIC PRO® COMPACT IONIC AIR PURIFIER
CA200_ENV_050511.indd 5-6 5/10/11 10:08 AM