User's Manual

User’s Guide
KlaT 8 10 of 25 Confidential Proprietary
1.3 Connecting the remote controller to the brain box
If the remote controller doesn’t seem to be associated to the brain box while using
your product for the first time, press and hold the MFB and the END button together
until the ‘Connected’ message is said. This has to be done during 30 seconds period
once the ignition is turned on. If the connection is not established continuously,
change the current battery as new one.
1.4 Pairing instruction
KlaT8 preparation:
1. First pairing
1) When your product turns on, you will hear ‘Pair mode’.
2) Your product is now ready. When it is paired with your phone, ‘KlaT8’ will
display on the screen.
2. Subsequent pairing
1) Turn on the Bluetooth feature on your phone.
2) Press and hold the CALL and END buttons until you hear ‘Pair mode’.
3) You can activate the pairing mode by tapping the CALL button or saying ‘Hello,
drive and talk (DriveNTalk)’ if the voice trigger is on. When you hear ‘Say a
command’, say ‘Pair mode.’
4) Your product is now in pairing mode.
5) If you don’t hear ‘Pair mode’, try again.
Phone preparation
1. Activate Bluetooth feature on your phone, then use the phone’s setting to ㅠ
add/search/discover new Bluetooth devices.
2. Select ‘KlaT8’ from the list of Bluetooth devices shown on your phone.
3. If necessary, enter the PIN code (default is ‘0000’). You may see **** on screen.