User's Manual

6
Contact: Enustech, Inc. www.enustech.com
[e-mail]
T. +82.2.565.0782 F. +82.2.501.1851 imFONE-BS User Manual v1.0
Standby / Connecting
Pairing / Connected
Refer to the LED operations with Stereo Headset
VoIP call/Audio Flashes once every 2 seconds ON
When used for General Bluetooth functions
*Applicable only after converting to HCI mode.
General Bluetooth White LED and Blue LED Flash every 1 Second simultaneously
3. Connecting to the Bluetooth Headset
To use imFONE dongle, it must be registered in the Bluetooth headset before it can provide a
link between the computer and the headset. This is called “Pairing” and it needs to be set only
once when you initially register the device. By resetting pairing, the imFONE dongle can be paired
with other Bluetooth Headsets.
A. Plug the imFONE Stereo dongle into the USB port of the PC.
B. Turn on the headset and place the headset in Pairing Mode.
C. Press down the multi-button (pairing button) of imFONE BS located at the center of the dongle
for 5 seconds to place the dongle in Pairing Mode.