User's Manual

EZBee series Manual / Ver. 1.0
42
7.8
7.87.8
7.8 Reading a modem version
Reading a modem versionReading a modem version
Reading a modem version
It is checked the firmware version of a modem using following AT
command.
Command
CommandCommand
Command Parameter
ParameterParameter
Parameter Result
ResultResult
Result Description
DescriptionDescription
Description
ATV
ATVATV
ATV None
EZB300FV1.0
EZB300FV1.0EZB300FV1.0
EZB300FV1.0 EZBEE300 FFD version 1.0
EZB300RV1.0
EZB300RV1.0EZB300RV1.0
EZB300RV1.0 EZBEE300 RFD version 1.0
7.9
7.97.9
7.9 Reading a modem status
Reading a modem statusReading a modem status
Reading a modem status
It is checked the current status of a modem using following AT
command.
Command
CommandCommand
Command Parameter
ParameterParameter
Parameter Result
ResultResult
Result Description
DescriptionDescription
Description
ATS
ATSATS
ATS None
$NWK=STOP
$NWK=STOP$NWK=STOP
$NWK=STOP
Non- establishing a PAN or not
join in the PAN
$NWK=COORD
$NWK=COORD$NWK=COORD
$NWK=COORD
PAN is started and a modem set
as a coordinator in the PAN
$NWK=ROUTER
$NWK=ROUTER$NWK=ROUTER
$NWK=ROUTER,
,,
,<SADDR>
A modem is joined in the PAN as
a Router, and a short- address is
assigned as <SADDR>
7.10
7.107.10
7.10 GPIO
GPIO GPIO
GPIO control and setting
control and settingcontrol and setting
control and setting
The EZBee formats support the functionality to read GPIO and ADC of
remote modems. It can read 8 GPIO ports and 2 ADC channels having 10
bit resolution.