User's Manual

EZBee series Manual / Ver. 1.0
41
Command Parameter Result Description
AT+EA?
None <extended address>
Read an extended address of a
current modem.
AT+EA@
<DstID>?
OK
/
ERROR
/
NWK
_STOP
Read an extended address of a
remote modem having <DstID>
In case of a remote modem, it returns a following message when a
message transmission is succeeded.
Message Parameter Description
$EA@
<DstID>=<EADDR>
Show an extended address <EADDR> of a remote
modem <DstID>.
7.6
7.67.6
7.6 Resetting a Modem
Resetting a Modem Resetting a Modem
Resetting a Modem
The command for modem resetting is shown as following.
Command
CommandCommand
Command Parameter
ParameterParameter
Parameter Result
ResultResult
Result Description
DescriptionDescription
Description
ATZ
ATZATZ
ATZ None $RESET
$RESET$RESET
$RESET
Software reset for a modem
7.7
7.77.7
7.7 Resetting a Network
Resetting a NetworkResetting a Network
Resetting a Network
In case of changing network parameters or joining again in the PAN,
the network status should be reset using following AT command.
Command Paramete
r
Result Description
ATNZ
None
$RESET
Reset the network