User's Manual

EZBee series Manual / Ver. 1.0
34
Command Parameter Result Description
AT+AS?
None
0
or
1
Show a current automatic start mode
AT+AS=
0 OK
Cancel a automatic start mode
1 OK
Activate a automatic start mode
7.2.7
7.2.77.2.7
7.2.7 Starting
Starting Starting
Starting EZBee
EZBee EZBee
EZBee network
networknetwork
network
In case of setting a modem for the first time or turning a automatic
start mode off, a following command initiates a PAN. A coordinator
establishes the PAN and routers try to join the PAN.
Command Parameter Result Description
AT&PS
None
OK
Establish a PAN or join a PAN
ERROR
PAN is already established or modem is
already joined in the PAN
When establishing a PAN or joining in the PAN is succeeded, following
event messages are delivered.
Message Description
$NWK=COORD
Show a PAN is stated and modem is set as a coordinator
$NWK=ROUTER
,<
SADDR>
Show a modem is joined as a router, and the assigned short-
address by a coordinator is <SADDR>