User's Manual

EZBee series Manual / Ver. 1.0
40
7.4
7.47.4
7.4 Reading a
Reading a Reading a
Reading a Short
ShortShort
Short-
--
- address
addressaddress
address
A 16 bit short- address assigned during the process of joining in the
PAN can be obtained by utilizing following AT commands. A short-
address is mainly used in practical communication instead of an extended
address.
Command Parameter Result Description
AT+SA?
None <short address> Read a short-address assigned
AT+SA@
<DstID>?
OK
/
ERROR
/
N
WK_STOP
Check a short-address having a remote
modem ID <DstID>
If the short- address returned from a modem shows 0xFFFE, then it
means the short address is not assigned because the PAN is not started or
a modem is not joined in the PAN yet.
In case of a remote modem, it returns a following message when a
message transmission is succeeded.
Message Parameter Description
$SA@
<DstID>=<SADDR>
Show a short-address <SADDR> of a remote
modem <DstID>
7.5
7.57.5
7.5 Reading an e
Reading an eReading an e
Reading an extended address
xtended addressxtended address
xtended address
Using following commands, the IEEE 64bit extended address of a
specific modem is readable.