User's Manual

EZBee series Manual / Ver. 1.0
23
Configuration
5.5
5.55.5
5.5 Communication modes of
Communication modes of Communication modes of
Communication modes of EZBee
EZBeeEZBee
EZBee L100
L100 L100
L100
EZBee- L100 supports the TCP/ IP socket programming. It can be
assigned as a client or server according to each ports and handles data as
unit of packet.
The packet format is selectable among the EBI mode, P- P(Peer to Peer,
Bypass mode), according to the port. The default setting is the EBI mode,
enables to communicate any modules connecting to same socket. When
the P- P mode is selected, it switched to the Bypass mode, and enable to
communicate without the specified module or header data.
5.6
5.65.6
5.6 EZBee
EZBeeEZBee
EZBee L100 LED
L100 LEDL100 LED
L100 LED display
displaydisplay
display
LED display
ACT LED
(blue color)
Flash when data are transmitted (Tx/Rx mode)
STA LED
(orange color)
In case of turning ON
denotes EZBee L100 is joined in the
network, and ready to communicate with
other EZBees.
In case of flashing denotes EZBee L100 is not joined in the
network.