User's Manual

EZBee series Manual / Ver. 1.0
22
5.4
5.45.4
5.4 Menu related to communication of
Menu related to communication of Menu related to communication of
Menu related to communication of EZBee
EZBeeEZBee
EZBee L100
L100 L100
L100
Status Monitoring
Shows current status of the EZBee L100
Port configuration
Set operation of the EZBee L100
- Active connection :
EZBEE L100 acts as a client of TCP/IP network, and tries to
connect to a designated server.
- client connecting time (period) :
When a port is assigned as TCP/IP client, the assigned port
tries to connect to the specified host IP by the period of client
connecting time.
- KeepAlive Enable:
Check whether the TCP/IP connection is alive or not.
- KeepAlive Interval:
In case of setting ‘KeepAlive Enable’ function, it checks
whether the connection is alive or not when data is not
transmitted to the specified port during a period of time.
- Port Setting:
port number: TCP port number
Active: Active TCP connection request. Client mode
Server IP: IP address for active connection
P-P: peer-to-peer mode setting for EZBee
- Communication:
P-P: peer-to-peer mode set for wirelss communication
MODULE ID: Module ID
TCP/IP
Configuration
- Device Name: assign the name of EZBee L100.
- Set the specified IP address.
EZBee
Set channel ID, PAN ID, group ID and module ID