User's Manual

EZBee series Manual / Ver. 1.0
12
3.2
3.23.2
3.2 Configuration of
Configuration of Configuration of
Configuration of EZBee
EZBeeEZBee
EZBee S100
S100S100
S100
Configuration method for a serial adaptor can be divided for RS- 232
and RS- 422/ 485 communication mode.
The baud rate of each communication mode is set by only DIP switches
on the EZBee S100.
3.2.1
3.2.13.2.1
3.2.1 RS
RSRS
RS-
--
- 232
232232
232 communication mode
communication modecommunication mode
communication mode
1 Selection switch for 232 or 422/ 485 is pushed to the 232 side.
2 Flow control method and baud rate for serial communication are set
by DIP switches.
3 EZBee S100 is connected to the serial port of a PC or DTE.
4 A mini USB cable protruded from a PC USB port or DC adaptor
should be connected to the mini USB port on EZBee S100 for
power supply.
3.2.2
3.2.23.2.2
3.2.2 RS
RSRS
RS-
--
- 422/ 485 communica
422/ 485 communica422/ 485 communica
422/ 485 communicati
titi
tion mode
on modeon mode
on mode
1 Selection switch for 232 or 422/ 485 is pushed to the 422/ 485 side.
2 The 422 or 485 mode is selected by DIP switches.
3 The baud rate for serial communication is set by DIP switches.
4 A mini USB cable protruded from a PC USB port or DC adaptor
should be connected to the mini USB port on EZBee S100 for
power supply.