User's Manual

Standby Mode. Repeat steps 1 to 4 to initiate pairing mode again.
4. Usage
1) Turn On/Off
Power On: Push the multi-function button of the product for 2 seconds to turn it on.
Power Off: Push the multi-function button of the product for 4 seconds to turn it off.
2) Connection
a. Once paired, press shortly on the Multi-function button to connect the car kit to the
mobile phone.
b. If not paired, see 3) pairing.
Note: if it was connected following the a. procedure, press and hold down the volume up or
volume down to enter the Stereo Mode (A2DP).
3) Call Functions
*Answer a call: Press shortly on the Multi-function button. .
*End a call:. Press shortly on the Multi-function button. .
*Voice Dialing: To place a call using voice dialing, press and hold down the multi-function
button for 1 second. You will hear a beep. Then say the name of the person you wish to
call using the voice tag that you previously recorded for that number.
Note: The voice dialing function is handset dependant. Consult your mobile phone’s user
guide to see if it supports voice dialing.
*Transferring calls between the product and mobile phone:
To transfer a call from the car kit to the mobile phone during a call, quickly press twice
on the Multi-Function button. To transfer a call from your mobile phone back to the car
kit repeat the same step.
6) Reject a call: To reject an incoming call when the product is ringing, press for 1 second on
the Multi-function button. A busy tone will be sent to the caller.
Note: The reject a call function is handset dependant. Consult your mobile phone’s user guide
to see if it supports reject a call function.