User's Manual

2. Charging hands-free car kit
Be sure to use the vehicle charger and USB charger cable provided.
The product uses an advanced lithium polymer rechargeable battery. When used for the first time,
it is important to charge the product for 2 hours, to ensure the battery is fully charged, ready for
use in the best conditions.
a) How to charge
Use the USB charger cable to connect the car kit to the vehicle charger.
Connect the product car kit through using the USB charger cable to the vehicle charger. Then
plug the vehicle charger into your car’s power outlet. The light on the USB charger cable
will light up red while it is charging. When the light on the USB charger cable turns green, the
product is fully charged.
Note: When the car kit battery is low, the Battery Icon on the product blinks, indicating that it
needs to be recharged.
3. Pairing
Before you use the product you must first pair it with your mobile phone.
Note: You can only pair devices that are Bluetooth enabled. To see if you mobile phone is
Bluetooth enabled, check your mobile phone’s user guide.
1) If the car kit is powered on, turn it off.
2) Press the Multi-function button for 7 seconds.Release the button when Bluetooth
Status Icon begins to flash quickly with beep sound (or TTS Message: Pairing Mode.
3) Use the mobile phone’s device search function and then select the device BHF-700.
4) Enter the password “0000” on your mobile phone.
5) The devices have been successfully paired when you see the Bluetooth Status Icon
changes or hear the message “Connected”.
Note: If the pairing is not successful within 2 minutes, the car kit status changes to