. Product Overview 2 3 1 5 4 6 7 8 1) Connection, Battery, FM Status 2) Microphone 3) Multi-function button 4) FM/TTS button 5) Volume Up button 6) Volume Down Button 7) Charging Port 8) Speaker
. Charging hands-free car kit Be sure to use the vehicle charger and USB charger cable provided. The product uses an advanced lithium polymer rechargeable battery. When used for the first time, it is important to charge the product for 2 hours, to ensure the battery is fully charged, ready for use in the best conditions. a) How to charge Use the USB charger cable to connect the car kit to the vehicle charger. Connect the product car kit through using the USB charger cable to the vehicle charger.
Standby Mode. Repeat steps 1 to 4 to initiate pairing mode again. 4. Usage 1) Turn On/Off Power On: Push the multi-function button of the product for 2 seconds to turn it on. Power Off: Push the multi-function button of the product for 4 seconds to turn it off. 2) Connection a. Once paired, press shortly on the Multi-function button to connect the car kit to the mobile phone. b. If not paired, see 3) pairing. Note: if it was connected following the a.
7) Last numbers redial To redial the last number you called, press twice the Multi-function button. 8) Volume Up / Down Use the Volume Up / Down button to adjust the volume. 9) Mute / Un-mute Press and hold down the Volume Down button for 1 second during the call. In this case, you are able to hear the other person but she/he won’t be able to hear you. To un-mute the call, quickly press once the Volume Up or Volume Down button. 10) Remove a registered mobile phone entry from the lists.
make a call or transfer music via car audio system. 13) FM Frequency Selection Mode The product has 7 pre-programmed frequencies. You can select one of them following these steps: a. Check if the car kit is in the Pairing Mode. b. When FM transmission mode is not active, press and hold down the FM/TTS button for 2 seconds. Release the FM/TTS button when you hear a beep. c. FM status icon blinks every 1 second indicating that FM Frequency Selection Mode is on, and the current frequency is announced.
16) TTS (Talk-to-Speech) Setting There are 9 languages supported in the following order: 1 UK English 2 US English 3 French 4 Italian 5 German 6 Spanish Mexican Portuguese 7 Portuguese 메모 [^1]: Wasn’t it 8 Brazilian Portuguese Mexican Spanish here? 9 Chinese The default language is British English. To change the TTS language (settings) follow these steps: 1) Enter the register mode.
2. FM Transmitter indication. FM transmit state LED indication No transmit FM LED off Transmit FM LED off Channel set 3. FM LED blinks every 1 second. TTS Status indication. FM transmit state Language selection LED indication Call Status LED and Connection LED blink alternatively. 4.
- Additional Page Cautions Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance Information This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received. Including interference that may cause undesired operation.
