User manual

11
16. Step 6 lets you update automatically any flame duration that is less tan ‘x’ seconds to ‘x+y’
seconds. Thus, if for example, there is a piece of choreography where the automatic flame
duration calculated from ScriptMaker Visual is less than 0.19 seconds, this wizard will let you
change anything that is 0.19 seconds or less to 0.2 seconds. This will automatically update any
flame duration that will be too short (and thus not perceivable to the human eye) to a duration
that is more acceptable and easily seen.
One can work around these figures as one wants to. Thus, whereas the main intention of this
wizard is to change anything that is too short to a decent time, it can also work the other way
round. Therefore, if user wants to grab any flame durations that are less than 3.5 seconds and
change them to 0.15 seconds for example, the wizard gives this option too.