User manual

10
14. Step 4 lets you specify whether you want to keep your existing choreography with all the 4
colours of the flame projectors or if the choreography should be changed automatically to
convert the red, green and blue flames to the yellow flames. What this convertor does is that it
grabs the channels pertaining to each and every individual Quad Flame Projector and changes
them to just the Yellow channel of each group. This functionality gives you the possibility to
make such a conversion automatically – thus without the need of going back to Scriptmaker
Visual and redo the choreography with just the yellow flames.
15. Step 5 lets you generate a report (either in text or Microsoft Word format) for the
channel/colour usage. This report gives the user an indication if a particular colour on a
particular channel is being over-used. The default number of seconds for the flames usage is 60
seconds which corresponds with the flame capacity of the aerosol cans provided. User can
actually change the number of seconds according to his needs.
The report generated will use this number of seconds as the limit for the flame duration usage.
Should the flame duration of a particular channel (in total) exceed the amount specified, the
report automatically identifies the channel and marks it…to grab the user’s attention.