User manual

Inpung of code (ex.: 1)
range: 0 : (enable) / 1 : (disable)
1 +#
Input the master code.
(Default : [
1 2 3 4
] +[#] )
(RED)
ON
(BLUE)
OFF
Beep + , Beep
7. Reset code seng 8.
*
&# funcon seng
(Default : Normal)
6. Seng operaon tone
(Default : ON)
5. Seng the unlock mode
(Default : 0 (opened))
Input the seng code.
04+#
(RED)
ON
(BLUE)
ON
Beep + , Beep
(RED)
ON
(BLUE)
OFF
Beep +
(RED)
ON
(BLUE)
OFF
Beep +
- The unlock mode can be set
on both monitor and door
staon, and the valid code is
the number you set last me.
- When the operaon tone is
set to 0, pressing the digital
keypad will give out a sound of
beep.
- When the operaon tone is
set to 1, pressing the digital
keypad will result in flashing
once.
- When the item is set to 0,
press the buon to cancel the
input, and press the # buon to
confirm the input.
- When the item is set to 1,
press the # buon to cancel the
input, and press the buon to
confirm the input.
- Cancel all the passwords
except the master code.
- Restore the master code to
default value (1,2,3,4).
Inpung of code (ex.: 1)
range: 0 : (open) / 1 : (close)
1 +#
Inpung of code (ex.: 1)
range: 0 : (on) / 1 : (off)
1 +#
(RED)
ON
(BLUE)
OFF
Beep +
(RED)
OFF
(BLUE)
OFF
Beep + , Beep
(RED)
ON
(BLUE)
OFF
Beep +
Input the seng code.
05+#
(RED)
ON
(BLUE)
ON
Beep + , Beep
Input the seng code.
06+#
(RED)
ON
(BLUE)
ON
Beep + , Beep
Input the seng code.
07+#
(RED)
ON
(BLUE)
ON
Beep + , Beep
- When the “ * cancel” key is pressed, the LED lights off, the buzzer beeps, and the system exits the seng mode
- When there isn’t any operaon in 10s, the LED lights off, the buzzer beeps, and the system exits the seng mode
Inpung of code
1 2 3 4 +#
Inpung of code (ex.: 1)
range: 0 : (normal) / 1 : (reverse)
1 +#
0/1 0/1 0/1
-15--14-
Input the master code.
(Default : [
1 2 3 4
] +[#] )
(RED)
ON
(BLUE)
OFF
Beep + , Beep
10.Interference resistant grade
seng (Default : 2)
9. Call tone seng
(Default : enable)
Input the seng code.
08+#
(RED)
ON
(BLUE)
ON
Beep + , Beep
(RED)
ON
(BLUE)
OFF
Beep +
- If the item is set to 0, the unit
will respond a call tone when
pressing the “CALL” buon.
- If the item is set to 1, the unit
will have no responds when
pressing the “CALL” buon.
- The larger you set the
interference resistant grade,
the stronger it will be, but the
sensivity of the keypad will be
lower.
- The interference resistan
grade seng also will acvate
the keypad checking.
(RED)
OFF
(BLUE)
OFF
Beep + , Beep
Input the seng code.
09+#
(RED)
ON
(BLUE)
ON
Beep + , Beep
- When the “ * cancel” key is pressed, the LED lights off, the buzzer beeps, and the system exits the seng mode
- When there isn’t any operaon in 10s, the LED lights off, the buzzer beeps, and the system exits the seng mode
0/1
Inpung of code (ex.: 3)
range: 0~5
3 +#
(RED)
ON
(BLUE)
OFF
Beep +