User manual

-13--12-
ORDER SETTING ITEMS SETTING RANGE DEFAULT VALUE SETTING CODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Reset all sengs 1, 2, 3, 4
1, 2, 3, 4
1, 2, 3, 4
-
-
-
-
-
-
00
01
02
03
04
05
06
07
08
09
10 - 17
18
19
20 - 59
60 - 99
Seng the master code
1 - 12 digits
Valid keys: 0 - 9
Seng the key
illuminaon me
10 to 99 seconds /
permantly lit
10 seconds
Seng the unlock me 01 to 99 seconds 1 seconds
Seng the unlock mode 0: opened/ 1: closed opened
Operaon tone sengs 0: on/ 1: off on
Reset code sengs
*
&# funcon sengs 0: Normal / 1: Reverse Normal
Call tone sengs 0: Enable / 1: Disable Enable
Interference resistant
grade sengs
Valid keys: 0 - 5 2
Reserve (not used) Reserve Reserve
Seng the code for
Temporary 1
1 - 12 digits
Valid keys: 0 - 9
1 - 12 digits
Valid keys: 0 - 9
Seng the code for
Temporary 2
Seng the code for
user group 1
1 - 12 digits
Number of codes: 40
Valid keys: 0 - 9
1 - 12 digits
Number of codes: 40
Valid keys: 0 - 9
Seng the code for
user group 2
1
4 5 6
98
0 #
7
*
2 3
blue
red
Input the master code.
(Default : [
1 2 3 4
] +[#] )
(RED)
ON
(BLUE)
OFF
Beep + , Beep
Each operaon is indicated by the lighng up of the LED
indicators on the right secon of the unit, and by the
sound of the buzzer.
3. Seng the key illuminaon
me (Default : 10s)
4. Seng the unlock me
(Default : 1s)
2. Seng the master code
(Default : 1 2 3 4)
1. Reset all sengs
Input the seng code.
00+#
(RED)
ON
(BLUE)
ON
Beep + , Beep
Inpung of new master code
(ex.: 4321) (1~12 digits)
4 3 2 1 +#
(RED)
ON
(BLUE)
OFF
Beep + , Beep
Inpung of code
1 2 3 4 +#
(RED)
ON
(BLUE)
OFF
Beep + , Beep
- All sengs will be restored to
their default value.
- When power on or rest of all
sengs is being acvated, the
keypad checking will start,
meanwhile the illuminaon
keys will flash, any contact of
the keypad is forbidden.
Aer finishing checking, the key
will stop flashing and give out a
long sound of beep.
- The master code is valid with
1~12 digits,the same code
cannot used both the user code
and the master code, it is
recommended that you modify
the default master code.
- The unlock me can be set on
both monitor and door staon,
and the valid code is the
number you set last me.
- If the key illuminaon me is
set to 00, the key will lightup
permantly when power on.
- If the key illuminaon me is
set to 10~99, the key will light
up for 10~99 seconds. In this
mode, the light of the keys will
be key off in standby mode,
touching any invalid digital key
can result in illuminate of key.
Inpung of code (ex.: 10)
range: 00 or 10~99
10 +#
(RED)
ON
(BLUE)
OFF
Beep + , Beep
(RED)
OFF
(BLUE)
OFF
Beep + , Beep
Inpung of code (ex.: 09)
range: 01~99
09 +#
(RED)
ON
(BLUE)
OFF
Beep + , Beep
Input the seng code.
01+#
(RED)
ON
(BLUE)
ON
Beep + , Beep
Input the seng code.
02+#
(RED)
ON
(BLUE)
ON
Beep + , Beep
Input the seng code.
03+#
(RED)
ON
(BLUE)
ON
Beep + , Beep
- When the “ * cancel” key is pressed, the LED lights off, the buzzer beeps, and the system exits the seng mode
- When there isn’t any operaon in 10s, the LED lights off, the buzzer beeps, and the system exits the seng mode