User manual

• Please clean the unit with so coon cloth, don't use the organic impregnant or chemical cleaning agent.
If necessary, please use a lile pure water or dilute soap water to clean the dust.
• The unit is weather resistant. However do not spray high pressure water on access control keypad directly.
Excessive moisture may cause problems with the unit.
• You must use the right adaptor which is supplied by the manufacture (or approved by the manufacture.)
• Pay aenon to the high voltage inside the products, please refer service only to a trained and qualified
professional.
8. Power Supply Instrucons
9. Precausons
• Lock Power supply : 12 Vdc, 300 mA (Internal Power)
• Power Consumpon : 2 W in standby, 8 W in working
• NO, COM dry contact : Max. 48 Vdc 1.5 A
• Camera angle : Max. 72º
• Number of relay circuits : 2
• Mounng : Surface mounng
• Dimension : 176(H) X 90(L) X 23(D) mm
• Working temperature : -10ºC ~ 45ºC
10. Specificaons
NAME DISCRIPTION USAGE
PS5-24V
PS4-24V
Power supply, 85 ~ 260 Vac input,
24 Vdc / 3A output, 10 DIN modules
Connect to mul doorstaons or
mul monitors (up to 2 or above)
Power supply, 85 ~ 260 Vac input, 24Vdc /
1A output, for basic kit only, 4 DIN modules
Connect to one doorstaon and one
monitor(DT16 can be connected two)
-18-