User`s manual

4 Channel (Basic)
Network Video Recorder
User’s Manual
English
8
Connect to the NVR
There are various ways you can connect to the NVR and below are
the suggested methods for network setup:
• The NVR is placed in a network with a DHCP server: Connect to
the NVR by using “Smart Device Search” Utility.
• The NVR is placed in a network without DHCP server (or you are
connecting to it directly): Access the NVR with its default IP.
Use NVR Search Utility
To begin, launch the “NVR Search” utility from the CD and proceed
with the installation.
When the NVR is on a corporate network, or a local area network
where a DHCP server is already present. Run the “Smart Device
Search” utility from a computer which is also on the same network
and locate the NVR via its IP address assigned by the top-level DHCP
server.